Help Center

Check which alerts are set up on your vehicles

1 min read

You can see every alert configured across your fleet, the threshold each one uses, and which vehicles are raising the most alerts.

Before you start

  • You need an account that can view fleet settings.
  • Publishing or changing a device setting on a vehicle requires an administrator; dispatchers and technicians can view but not publish.

Steps

  1. Open Settings and choose Alerts to read back every alert configured across the fleet, such as speeding, hard braking and geofence alerts.
  2. Check each row's threshold. Speed thresholds carry their unit.
  3. On the Alerts feed (Fleet > Alerts), look at the Most alerts by vehicle list to see which vehicles raised the most alerts in the period shown.

Where to set how often a vehicle reports its location

How often a vehicle reports its location is not an alert. To change it, open Fleet > Alerts and select the Configuration tab. Set Location every, engine on and Location every, engine off for the whole fleet, or open a vehicle to give it its own timing. For example, every 30 seconds with the engine on and every 5 minutes with it off.

Result / verify

Every configured alert appears on the Settings page with a readable threshold. The "most alerts by vehicle" list contains vehicles only, and its caption counts the same vehicles it shows.